Error running Hardwall simulation - Runtime error: Plan failed (Traceback from c++ library)

[sitangshugk95]

Surface Topography and Contact Mechanics packages have been successfully installed.
I am trying to run the example file Hardwall simulation from Contact Mechanics using Jupyter, but I am getting the following error -

How can I solve this?

[sitangshugk95]

Similar errors while running easy_hardwall_simulation

@sannant @pastewka @mcrot

[sannant]

Dear @sitangshugk95, sorry for all the mess

@jotelha built a docker image allowing to start a kind of virtual machine with SurfaceTopography, ContactMechanics and even Adhesion.

I think there is even a Docker application for windows but I never tried.

Please follow the instructions here: https://github.com/ContactEngineering/SurfaceTopography/tree/doc/instructions_for_docker_image

Sorry that we didn't come earlier to this solution.

I hope that using ContactMechanics via this image solves the problems.

[sitangshugk95]

Hello @sannant ,

Thanks for the response.

1. Were the screenshots that I sent an error on my part only, or are you seeinng the same errors too?
2. I don't really need Windows anymore, as we have purchased a Linux system solely for running Contact Mechanics via your packages.
3. @jotelha The installation guide for Docker has a lot of sudo commands on it, but I don't have sudo rights. Are there any other alternatives?

[jotelha]

@sitangshugk95 I am no SurfaceTopography expert, and I can't offer any third alternative next to the manual setup instructions or the docker image, but I am afraid without admin privileges on your machine, it will be difficult to get SurfaceTopography running properly either way. The docker image can help when you are having troubles putting together the right environment, but it will introduce many other inconveniences if you are not used to working with containers. If your machine does not have the docker engine installed and you don't have the privileges to do that, the docker image is of course useless anyway.

[pastewka]

We could convert the Docker into a Singularity image which can be run without root priviledges.

[jotelha]

Sure, but installing the singularity engine in the first place will of course still require root privileges, @sitangshugk95 . The docker recipe currently lives at IMTEK-Simulation/code-snippets#20,
shall we move that into SurfaceTopography, @pastewka ? Originally, that was only intended as my "quick and dirty" personal environment documentation, and I am a bit worried that it will introduce more maintenance overhead than it will resolve support issues in the long run.

[sitangshugk95]

Hello @pastewka - that is what my IT dept suggested as well - use Singularity instead. IT has installed Singularity on my system, so I am able to download and open the Docker image using Singularity now. (My university has restricted Docker for security reasons, but Singularity is available for use)

Hello @jotelha I have followed your instructions , and I am currently on this screen after opening the jupyterlab server in my browser:

Specifically, I want to run and modify the HardwallSimulations jupyter notebook file from the ContactMechanics git repo. What should be my next step?

[sannant]

I am not sure that is the simplest solution, but you can run

wget https://raw.githubusercontent.com/ContactEngineering/ContactMechanics/1.0.0/examples/Hardwall_Simulation.ipynb

That will download it

[sitangshugk95]

1. Do you mean typing the command in the terminal of the window opened on the browser using Singularity? If yes, I have downloaded it : What command should I use to run it?
2. I used jupyter notebook to run it.
   
   I opened the link in a web browser, but when I try to run, I get the same error as I was getting on my own system (without using Singularity):
   
   Am I doing something wrong?

[sitangshugk95]

@sitangshugk95 I am no SurfaceTopography expert, and I can't offer any third alternative next to the manual setup instructions or the docker image, but I am afraid without admin privileges on your machine, it will be difficult to get SurfaceTopography running properly either way. The docker image can help when you are having troubles putting together the right environment, but it will introduce many other inconveniences if you are not used to working with containers. If your machine does not have the docker engine installed and you don't have the privileges to do that, the docker image is of course useless anyway.

@jotelha The error that I am getting using the Docker image is the same as the one I was getting when using the manual steps - which somehow makes me feel like it is not an issue with my system (I might be wrong though). If you can convert it into a Singularity image and send me, I can try running it again.

• Has anyone been able to install it from scratch recently? Have they faced similar issues while installing, or is it just me?
• If any of you can find some time out, we can schedule a quick Zoom/Teams meeting to walk you through the steps I am doing, and hopefully sort this out. I can also prepare a step-by-step documentation for future users.

P.S. I really appreciate you guys helping me out, as I am stuck in a project that needs BEM modeling. In fact, I made my advisor buy a dedicated Linux system just for running this code, so I really need to get this thing running asap.

[sannant]

Sorry for the mess . What you do wrong is that you do not need to start a notebook from the terminal in jupyterlab.
jupyter lab replaces jupyter notebook
I think there is enough material on the web to help you familliarize with jupyter lab.

But quickly: on the left in your second screenshoot you see a file browser of your local filesystem. You can open the notebook by double clicking and this should open it with the kernel from the docker/singularity image.

I think now you have already everything in your hands to make things work. I am happy to schedule a zoom meeting to discuss the last issues.

I can help with our code and singularity, but I almost never used docker.

[jotelha]

@sitangshugk95 I see you got the container running with singularity. Unfortunately, it's not that straight forward to just run a docker container with singularity if the container engineer did not think about making it compatible with different container engines. The image builds on https://jupyter-docker-stacks.readthedocs.io/en/latest/, and those don't have singularity in mind. The main issue here is that these images introduce their own user "jovyan" and expect their home folder to be available with the permissions set properly, which is not the case when simply launching with

singularity run docker://imteksim/jupyterlab-surfacetopography:0.3.0

As in your screenshots, you won't see the SurfaceTopography Kernel then and likely encounter many other errors. What worked for me with singularity is the following, but again, if you do not have root privileges on your local machine, you will likely hit another barrier here:

• you will likely need > 10 GB empty storage to begin with
• run the image with
  singularity exec --writable --fakeroot --no-home --containall --userns docker://imteksim/jupyterlab-surfacetopography:0.3.0 bash -c 'cd /home/jovyan && chown -R jovyan . && start-wrapper.sh start-notebook.sh'

This will do a few things, in particular it will unpack the image locally, isolate it completely from your system (any changes done within the running container will be lost after stopping singularity), change to the correct directory and modify the permissions to what the original service needs.

You should end up with a launcher offering two kernels,

you should be able to download Antoine's test script,

and you should be able to run it after choosing the kernel

at least down to cell 14, where I encounter this error,

[sitangshugk95]

@jotelha Thank you for the very detailed message. Once I get through the initial hurdle of getting to run the Docker image properly using singularity, the remaining steps look manageable.

For now, I tried singularity exec --writable --fakeroot --no-home --containall --userns docker://imteksim/jupyterlab-surfacetopography:0.3.0 bash -c 'cd /home/jovyan && chown -R jovyan . && start-wrapper.sh start-notebook.sh' as per your suggestion, and I got the following error:

Also, if this does not work, is it possible to make a file compatible with Singularity directly? Would that make things simpler?

I have the following options available to me:

1. A windows PC with admin access
2. An Ubuntu system without admin access (but with Singularity installed)

[jotelha]

@sitangshugk95 that's exactly what I expected. I gave the docker image an overhaul, and (at least on my machine) it now runs without root privileges with

singularity run docker://imteksim/jupyterlab-surfacetopography:0.4.0

would you give it another try?

[sitangshugk95]

@jotelha This works (yayy!!), thank you so much for going through all this. I do see the same error on cell 14, but that looks like a code error.

Just one final question - is there a way I can store the values that the program is executing somewhere on my local PC, so that I can use them as an input to another program (eg; calculate contact resistance in another FEM program based on the gap calculated by the SurfaceTopography package?)