Motion v5.0 on Trixie #1928
Replies: 3 comments 4 replies
-
|
Hi Robert, what exactly does not work? When you see the streams on Nginx/VLC, but not within motion, did you check the camera.conf files in motion?I tried ffmpeg over and over again, but it simply does not work as expected. Also, it creates a lot of CPU load. At what point does rpicam-vid not work? Do you actually get a stream out of the cam? |
Beta Was this translation helpful? Give feedback.
-
|
Another thought: If you don't get a video stream out of the berry on trixie, you would have to update the rpicam-apps to v1.10 You might also try my newer article for the streaming here: That one is in German only, but you can translate it with Google or the browser built-in translation tools :) It works on my rpi zero 2w and rpi 4b on trixie and bookworm. |
Beta Was this translation helpful? Give feedback.
-
|
rpicam-apps is already the newest version (1.10.1-1). |
Beta Was this translation helpful? Give feedback.
-
Solved!!The new article did it but I need to do a diff to find the specific problem. My rpicam-vid statement was the issue I think.
|
Beta Was this translation helpful? Give feedback.
-
|
That's good news! :) Happy, that it works now. And happy Holidays also! :) |
Beta Was this translation helpful? Give feedback.
-
Maybe a second set of eyes will see something.PiZero2W PiCam2W47 192.168.1.47#!/bin/bash rpicam-vid -t 0 --width 1536 --height 864 --hdr off --nopreview Pi 4 with Motion and Nginx PiMotion412 192.168.1.12/usr/local/var/lib/motion/conf.d/camera47.conf ;************************************************* ;************************************************* ;************************************************* ;************************************************* ;************************************************* ;************************************************* Log Output[NTC][VID][cl101:MyCam1] start_config: Finished. MyCam1 is a separate Camera.conf with libcam_device camera0 (Arducam OV5647) |
Beta Was this translation helpful? Give feedback.
-
|
Log Level 9 [NTC][VID][cl100:MyCam47] netcam_start: Norm: Opening Netcam |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
Has anyone had success with the following using Trixie on a Pi 4 or Pi 5?
https://www.wetransco.de/2023/12/debian ... -module-3/
I have been running solid for more than a year now with Motion Plus, Debian Bookworm on Virtual Box and PiZero2W Cameras (Trixie).
I am trying to build a portable kit with a Pi 4 (Trixie), Openwrt and PiZero2W Cameras (Trixie).
My onboard camera on PI 4 works, but rpicam-vid video streams listed on the Linked Page do not.
The Video Streams work via VLC and also NGINX but never connect to the Motion v5 NetCAM interface.
I am about to give up on rpicam-vid and start trying ffmpeg but thought I would ask here first.
Beta Was this translation helpful? Give feedback.
All reactions