Stagger Start Not Staggering

[MinesofMoriaCrypto]

When hitting Stagger Start in 1.1.14 on multiple machines, it seems to start all jobs, rather than starting with a stagger. I have Stagger options of a max of Phase 1 jobs and a time stagger set. It seems to obey the max Phase 1 jobs, but not the time stagger.

[abueide]

please show a screenshot with your drive settings & your global stagger settings

[MinesofMoriaCrypto]

I've had the experience on two machines the first:

AMD 5600X
64GB DDR4-3200 CAS 14
2x Patriot Viper 4300 PCIe v4 1TB
Final Plots drives: 8TB WD Red Plus, 10TB WD Red Pro
Gigbyte Aorus X570 Elite
Radeon 580 6GB
Windows 10 Pro - Up to date
Chia 1.1.7
HP 1.1.14
Had the problem with 6 jobs of 4 thread, 8000 Memory. Global limits of 4 jobs in Phase 1 with 20 minute offset. Drive Limits of 4 plots on each SSD.
As well as with 8 jobs of 4 thread 8000 Memory. Global limits of 4 jobs in Phase 1 with 20 minute offset. Drive Limits of 4 plots on each SSD.

The other machine I'm having the same issue with that I have a screenshot of did it twice in a row, starting all jobs when I boot HP and not staggering. Then did not do it twice in a row on booting HP, but then on the fifth time did it. I've been keeping track over the last 2 days.

AMD 6300FX (6 Cores, 6 Threads)
16GB DDR4-2400
System Drive - 150GB SSD
Temp Drive 1TB Samsung SSD
Final Plot Drive: NAS over 1000mbps network - Buffalo DS220DE with 2x 4TB Seagate in Raid 0
Radeon 460 4GB
Windows 10 Pro - Up to date
Chia 1.1.7
HP 1.1.14

3 Jobs of 2 thread, 3800 max memory. Global Limits of 3 plots in Phase 1, with an offset of 60 minutes. Drive temp limit of 3 plots. It's particularly problematic when it does it on this machine as the file copy takes 45 minutes when the job completes. So without the offset, the network connection gets bogged down.

Let me know if there's any other relevant information I can provide.