Create a SSD1306 OLED class using default I2C address

Author: waynedyck

examples/ssd1306_pillow_clock.py

@@ -20,7 +20,14 @@
 
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)
+
+# Create the SSD1306 OLED class.
+# The first two parameters are the pixel width and pixel height.
+# Change these to the right size for your display!
+oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c)
+
+# Note you can change the I2C address, or add a reset pin:
+# oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)
 
 # Clear display.
 oled.fill(0)

examples/ssd1306_pillow_image_display.py

@@ -20,7 +20,14 @@
 
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)
+
+# Create the SSD1306 OLED class.
+# The first two parameters are the pixel width and pixel height.
+# Change these to the right size for your display!
+oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c)
+
+# Note you can change the I2C address, or add a reset pin:
+# oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)
 
 # Clear display.
 oled.fill(0)

examples/ssd1306_pillow_ip.py

@@ -37,7 +37,14 @@ def get_ip_address(ifname):
 # Very important... This lets py-gaugette 'know' what pins to use in order to reset the display
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)
+
+# Create the SSD1306 OLED class.
+# The first two parameters are the pixel width and pixel height.
+# Change these to the right size for your display!
+oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c)
+
+# Note you can change the I2C address, or add a reset pin:
+# oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)
 
 # This sets TEXT equal to whatever your IP address is, or isn't
 try:

examples/ssd1306_pillow_text.py

@@ -20,7 +20,14 @@
 # Very important... This lets py-gaugette 'know' what pins to use in order to reset the display
 i2c = board.I2C()  # uses board.SCL and board.SDA
 # i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
-oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)
+
+# Create the SSD1306 OLED class.
+# The first two parameters are the pixel width and pixel height.
+# Change these to the right size for your display!
+oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c)
+
+# Note you can change the I2C address, or add a reset pin:
+# oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)
 
 # Clear display.
 oled.fill(0)