Merge: USB/TB code rebase of supported drivers to upstream v6.16

MR: https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-10/-/merge_requests/1501

JIRA: https://issues.redhat.com/browse/RHEL-116007

This MR rebases supported usb/tbt/memstick/extcon drivers to upstream
kernel v6.16. By design, rebase changes are limited to supported drivers
and their relevant physical infrastructure. Treewide changes which touch
these drivers are partially pulled in, whenever found out to be relevant.

1) CVEs:
```
CVE: CVE-2025-38275
CVE: CVE-2025-38103
CVE: CVE-2025-38134
CVE: CVE-2025-38174
CVE: CVE-2025-38268
CVE: CVE-2025-38535
CVE: CVE-2025-38376
CVE: CVE-2025-38391
CVE: CVE-2025-38404
```

2) Omitted fixes:
```
Omitted-fix: f17d5b9 ("arm64: defconfig: update renamed PHY_SNPS_EUSB2")
```

Signed-off-by: Desnes Nunes <desnesn@redhat.com>

Approved-by: Tony Camuso <tcamuso@redhat.com>
Approved-by: Bastien Nocera <bnocera@redhat.com>
Approved-by: Eric Chanudet <echanude@redhat.com>
Approved-by: John W. Linville <linville@redhat.com>
Approved-by: CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com>

Merged-by: Scott Weaver <scweaver@redhat.com>

Conflicts:
  - drivers/usb/phy/phy-mv-usb.c: conflict with !1425 resolved by
    removing this file which was removed in the original !1501.

Signed-off-by: Scott Weaver <scweaver@redhat.com>

Author: swvrrh

Documentation/admin-guide/thunderbolt.rst

@@ -296,6 +296,39 @@ information is missing.
 To recover from this mode, one needs to flash a valid NVM image to the
 host controller in the same way it is done in the previous chapter.
 
+Tunneling events
+----------------
+The driver sends ``KOBJ_CHANGE`` events to userspace when there is a
+tunneling change in the ``thunderbolt_domain``. The notification carries
+following environment variables::
+
+  TUNNEL_EVENT=<EVENT>
+  TUNNEL_DETAILS=0:12 <-> 1:20 (USB3)
+
+Possible values for ``<EVENT>`` are:
+
+  activated
+    The tunnel was activated (created).
+
+  changed
+    There is a change in this tunnel. For example bandwidth allocation was
+    changed.
+
+  deactivated
+    The tunnel was torn down.
+
+  low bandwidth
+    The tunnel is not getting optimal bandwidth.
+
+  insufficient bandwidth
+    There is not enough bandwidth for the current tunnel requirements.
+
+The ``TUNNEL_DETAILS`` is only provided if the tunnel is known. For
+example, in case of Firmware Connection Manager this is missing or does
+not provide full tunnel information. In case of Software Connection Manager
+this includes full tunnel details. The format currently matches what the
+driver uses when logging. This may change over time.
+
 Networking over Thunderbolt cable
 ---------------------------------
 Thunderbolt technology allows software communication between two hosts

Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml

@@ -43,15 +43,15 @@ properties:
   fsl,phy-tx-vref-tune-percent:
     description:
       Tunes the HS DC level relative to the nominal level
-    minimum: 94
+    minimum: 90
     maximum: 124
 
   fsl,phy-tx-rise-tune-percent:
     description:
       Adjusts the rise/fall time duration of the HS waveform relative to
       its nominal value
-    minimum: 97
-    maximum: 103
+    minimum: 90
+    maximum: 120
 
   fsl,phy-tx-preemp-amp-tune-microamp:
     description:
@@ -63,8 +63,7 @@ properties:
   fsl,phy-tx-vboost-level-microvolt:
     description:
       Adjust the boosted transmit launch pk-pk differential amplitude
-    minimum: 880
-    maximum: 1120
+    enum: [844, 1008, 1156]
 
   fsl,phy-comp-dis-tune-percent:
     description:
@@ -112,6 +111,34 @@ allOf:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-usb-phy
+            - fsl,imx8mp-usb-phy
+    then:
+      properties:
+        fsl,phy-tx-vref-tune-percent:
+          minimum: 94
+        fsl,phy-tx-rise-tune-percent:
+          minimum: 97
+          maximum: 103
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-usb-phy
+    then:
+      properties:
+        fsl,phy-tx-vref-tune-percent:
+          maximum: 108
+        fsl,phy-comp-dis-tune-percent:
+          minimum: 94
+          maximum: 104
+
   - if:
       required:
         - orientation-switch

Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nxp,ptn3222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3222 1-port eUSB2 to USB2 redriver
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - nxp,ptn3222
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  vdd1v8-supply:
+    description: power supply (1.8V)
+
+  vdd3v3-supply:
+    description: power supply (3.3V)
+
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        redriver@4f {
+            compatible = "nxp,ptn3222";
+            reg = <0x4f>;
+            #phy-cells = <0>;
+            vdd3v3-supply = <&vreg_3p3>;
+            vdd1v8-supply = <&vreg_1p8>;
+            reset-gpios = <&gpio_reset GPIO_ACTIVE_LOW>;
+        };
+    };
+...

Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt

@@ -43,6 +43,8 @@ properties:
       - qcom,x1e80100-qmp-gen3x2-pcie-phy
       - qcom,x1e80100-qmp-gen4x2-pcie-phy
       - qcom,x1e80100-qmp-gen4x4-pcie-phy
+      - qcom,x1e80100-qmp-gen4x8-pcie-phy
+      - qcom,x1p42100-qmp-gen4x4-pcie-phy
 
   reg:
     minItems: 1
@@ -122,6 +124,7 @@ allOf:
             enum:
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy
               - qcom,x1e80100-qmp-gen4x4-pcie-phy
+              - qcom,x1p42100-qmp-gen4x4-pcie-phy
     then:
       properties:
         reg:
@@ -176,6 +179,8 @@ allOf:
               - qcom,x1e80100-qmp-gen3x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x8-pcie-phy
+              - qcom,x1p42100-qmp-gen4x4-pcie-phy
     then:
       properties:
         clocks:
@@ -206,18 +211,13 @@ allOf:
               - qcom,sm8650-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x8-pcie-phy
     then:
       properties:
         resets:
           minItems: 2
         reset-names:
           minItems: 2
-    else:
-      properties:
-        resets:
-          maxItems: 1
-        reset-names:
-          maxItems: 1
 
   - if:
       properties: