This is a devboard based on the RP2350 chip (the rp2040's successor) with three mechanical switches, with every gpio exposed on pin headers + extras like 3v3 and vbus. It was entirely designed in Kicad and everything is open source! 4 layer board that can be manufactured with normal jlcpcb tolerances.
- RP2350
- 3x Cherry MX switches
- Recommended abracon crystal & inductors
- AP63203WU-7 for the 5v to 3v3 conversion
- 1x23 pin headers
- W25Q64JVSSIQ_C179171 chip for the flash (64mb)
- a usb-c connector
- clicky
might workworks!- open source
\
you can download everything in the kicad/ folder
- there's a resistor missing for the usb-c, so it only works in one orientation :(