DAP: define constants for DAPLink's CMSIS-DAP vendor commands. (ARMmbed#891)

Author: flit

source/daplink/cmsis-dap/DAP_vendor.c

@@ -2,6 +2,7 @@
  * Copyright (c) 2013-2020 Arm Limited. All rights reserved.
  * Copyright 2019, Cypress Semiconductor Corporation
  * or a subsidiary of Cypress Semiconductor Corporation.
+ * Copyright (c) 2021 Chris Reed
  *
  * SPDX-License-Identifier: Apache-2.0
  *
@@ -38,7 +39,7 @@
 #include "target_family.h"
 #include "flash_manager.h"
 #include <string.h>
-
+#include "daplink_vendor_commands.h"
 
 #ifdef DRAG_N_DROP_SUPPORT
 #include "file_stream.h"
@@ -66,15 +67,15 @@ uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
   *response++ = *request;        // copy Command ID
 
   switch (*request++) {          // first byte in request is Command ID
-    case ID_DAP_Vendor0: {
+    case ID_DAP_GetUniqueID: {
         const char *id_str = info_get_unique_id();
         uint8_t len = strlen(id_str);
         *response++ = len;
         memcpy(response, id_str, len);
         num += (len + 1); // increment response count by ID length + length byte
         break;
     }
-    case ID_DAP_Vendor1: {
+    case ID_DAP_UART_GetLineCoding: {
         // get line coding
         int32_t read_len = sizeof(CDC_LINE_CODING);
         CDC_LINE_CODING cdc_line_coding;
@@ -83,7 +84,7 @@ uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
         num += (read_len + 1);
         break;
     }
-    case ID_DAP_Vendor2: {
+    case ID_DAP_UART_SetConfiguration: {
         // set uart configuration
         CDC_LINE_CODING cdc_line_coding;
         USBD_CDC_ACM_PortGetLineCoding(&cdc_line_coding);
@@ -97,7 +98,7 @@ uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
         num += (sizeof(uint32_t) << 16) | 1;
         break;
     }
-    case ID_DAP_Vendor3:  {
+    case ID_DAP_UART_Read:  {
         // uart read
         int32_t read_len = 62;
         read_len = uart_read_data(response + 1, read_len);
@@ -109,7 +110,7 @@ uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
         num += (read_len + 1);
         break;
     }
-    case ID_DAP_Vendor4:  {
+    case ID_DAP_UART_Write:  {
         // uart write
         int32_t write_len = *request;
         request++;
@@ -122,7 +123,7 @@ uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
     case ID_DAP_Vendor5:  break;
     case ID_DAP_Vendor6:  break;
     case ID_DAP_Vendor7:  break;
-    case ID_DAP_Vendor8: {
+    case ID_DAP_SetUSBTestMode: {
         *response = 1;
         if (0 == *request) {
             main_usb_set_test_mode(false);
@@ -134,7 +135,7 @@ uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
         num += (1U << 16) | 1U; // increment request and response count each by 1
         break;
     }
-    case ID_DAP_Vendor9: {
+    case ID_DAP_ResetTargetIfNoAutoReset: {
         // reset target
         *response = 1;
         if (!config_get_auto_rst()) {
@@ -144,19 +145,19 @@ uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
         break;
     }
 #ifdef DRAG_N_DROP_SUPPORT
-    case ID_DAP_Vendor10: {
+    case ID_DAP_MSD_Open: {
         // open mass storage device stream
         *response = stream_open((stream_type_t)(*request));
         num += (1 << 16) | 1;
         break;
     }
-    case ID_DAP_Vendor11: {
+    case ID_DAP_MSD_Close: {
         // close mass storage device stream
         *response = stream_close();
         num += 1;
         break;
     }
-    case ID_DAP_Vendor12: {
+    case ID_DAP_MSD_Write: {
         // write to mass storage device
         uint32_t write_len = *request;
         request++;
@@ -166,7 +167,7 @@ uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
         break;
     }
 #endif
-    case ID_DAP_Vendor13: {
+    case ID_DAP_SelectEraseMode: {
         // switching between chip erase and page erase
         //              COMMAND(OUT Packet)
         //              BYTE 0 1000 1110 0x8D

source/daplink/cmsis-dap/daplink_vendor_commands.h

@@ -0,0 +1,39 @@
+/*
+ * DAPLink Interface Firmware
+ * Copyright (c) 2021 Chris Reed
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/**
+ * @file
+ * @brief Vendor-specific CMSIS-DAP command constants.
+ */
+
+#include "DAP.h"
+
+//! @name DAPLink vendor-specific CMSIS-DAP command IDs
+//@{
+#define ID_DAP_GetUniqueID              ID_DAP_Vendor0
+#define ID_DAP_UART_GetLineCoding       ID_DAP_Vendor1
+#define ID_DAP_UART_SetConfiguration    ID_DAP_Vendor2
+#define ID_DAP_UART_Read                ID_DAP_Vendor3
+#define ID_DAP_UART_Write               ID_DAP_Vendor4
+#define ID_DAP_SetUSBTestMode           ID_DAP_Vendor8
+#define ID_DAP_ResetTargetIfNoAutoReset ID_DAP_Vendor9
+#define ID_DAP_MSD_Open                 ID_DAP_Vendor10
+#define ID_DAP_MSD_Close                ID_DAP_Vendor11
+#define ID_DAP_MSD_Write                ID_DAP_Vendor12
+#define ID_DAP_SelectEraseMode          ID_DAP_Vendor13
+//@}
+