Comment on connector hookup where relevant

Author: terrillmoore

variants/CATENA_4551/variant.cpp

@@ -28,31 +28,31 @@ extern "C" {
 // to STM32 PinName (PX_n)
 const PinName digitalPin[] = {
 //PX_n,  //Dx
-  PA_10, //D0      D0_RX
-  PA_9,  //D1      D1_TX
+  PA_10, //D0      D0_RX		JP1-3
+  PA_9,  //D1      D1_TX		JP1-2
   PA_7,  //D2      RADIO_MOSI
   PA_6,  //D3      RADIO_MISO
   PB_3,  //D4      RADIO_SCK
   PB_6,  //D5      D5			JP3-10
-  PA_13, //D6      D6_SWDIO
+  PA_13, //D6      D6_SWDIO		JP3-9
   PA_15, //D7      RADIO_NSS
   PC_0,  //D8      RADIO_RESET
-  PA_14, //D9      D9_SWCLK
-  NC,    //D10     PH1_OSC_OUT
-  NC,    //D11     PH0_OSC_IN
-  PB_7,  //D12     D12
-  PB_2,  //D13     D13_LED
-  PA_0,  //D14/A0  A0
-  PA_5,  //D15/A1  A1
-  PA_4,  //D16/A2  A2
-  PA_3,  //D17/A3  A3_VBAT_DET
-  PA_2,  //D18/A4  A4_VBUS_DET
-  PB_12, //D19/A5  NSS
-  PB_9,  //D20/A6  SDA
-  PB_8,  //D21/A7  SCL
-  PB_14, //D22/A8  MISO
-  PB_15, //D23/A9  MOSI
-  PB_13, //D24/A10 SCK
+  PA_14, //D9      D9_SWCLK		JP3-8
+  NC,    //D10     PH1_OSC_OUT		JP3-7
+  NC,    //D11     PH0_OSC_IN		JP3-6
+  PB_7,  //D12     D12			JP3-5
+  PB_2,  //D13     D13_LED		JP3-4
+  PA_0,  //D14/A0  A0			JP1-12
+  PA_5,  //D15/A1  A1			JP1-11
+  PA_4,  //D16/A2  A2			JP1-10
+  PA_3,  //D17/A3  A3_VBAT_DET		JP1-9
+  PA_2,  //D18/A4  A4_VBUS_DET		JP1-8
+  PB_12, //D19/A5  NSS			JP1-7
+  PB_9,  //D20/A6  SDA			JP3-12
+  PB_8,  //D21/A7  SCL			JP3-11
+  PB_14, //D22/A8  MISO			JP1-4
+  PB_15, //D23/A9  MOSI			JP1-5
+  PB_13, //D24/A10 SCK			JP16
   PB_4,  //D25/A11 RADIO_DIO_0
   PB_1,  //D26/A12 RADIO_DIO_1
   PB_0,  //D27/A13 RADIO_DIO_2