Added run to completion task runner example

Author: rstoica

examples/SchedulerTaskCompletionQueue/SchedulerTaskCompletionQueue.ino

@@ -0,0 +1,128 @@
+/**
+ * @file SchedulerTaskCompletionQueue.ino
+ * @version 1.0
+ * @author Andrei Stoica
+ *
+ * @section License
+ * Copyright (C) 2015-2017, Mikael Patel
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * @section Description
+ * This Arduino sketch shows how to use the Scheduler library;
+ * Queue events between tasks.
+ */
+
+#include <Scheduler.h>
+#include <Scheduler/Queue.h>
+
+// Check for SparkFun SAMD21 Breakout
+#if defined(ARDUINO_ARCH_SAMD) && (USB_PID == 0x8D21)
+#define Serial SerialUSB
+#endif
+
+Queue<SchedulerClass::func_t, 4> taskq;
+
+volatile unsigned int sum100;
+
+volatile unsigned int fact10;
+
+void sumTo100()
+{
+  const unsigned int N = 100;
+  sum100 = 0;
+  for (unsigned int i = 0; i != N+1; ++i) 
+  {
+	  sum100 += i;
+	  delay(random(10));
+  }
+}
+
+void factTo10()
+{
+  const unsigned int N = 10;
+  fact10 = 1;
+  for (unsigned int i = 1; i != N+1 ; ++i) 
+  {
+	  fact10 *= i;
+	  delay(random(10));
+  }
+}
+
+void printAlive()
+{
+  Serial.print(millis());
+  Serial.print(F(":printAlive::"));
+  Serial.println(F("alive..."));
+  yield();
+}
+
+void printAliveLoop()
+{
+  Serial.print(millis());
+  Serial.print(F(":printLoop::"));
+  Serial.println(F("alive loop..."));
+  delay(500);
+}
+
+void setup()
+{
+  Serial.begin(57600);
+  while (!Serial);
+  Serial.println(F("SchedulerTaskCompletionQueue: started"));
+  Serial.flush();
+
+  SchedulerClass::func_t task;
+
+  task = sumTo100;
+  Serial.print(millis());
+  Serial.print(F(":setup::push task sumto100="));
+  Serial.println(int(&sumTo100));
+  taskq.push(&task);
+  
+  task = factTo10;
+  Serial.print(millis());
+  Serial.print(F(":setup::push task factTo10="));
+  Serial.println(int(&factTo10));
+  taskq.push(&task);
+  
+  task = printAlive;
+  Serial.print(millis());
+  Serial.print(F(":setup::push task printAlive="));
+  Serial.println(int(&printAlive));
+  taskq.push(&task);
+
+  // Start two event handlers
+  Scheduler.startLoop(taskRunner);
+  Scheduler.startLoop(taskRunner);
+  Scheduler.startLoop(printAliveLoop);
+}
+
+void loop()
+{
+  delay(1000);
+  
+  Serial.print(millis());
+  Serial.print(F(":loop sum100="));
+  Serial.println(sum100);
+  
+  Serial.print(millis());
+  Serial.print(F(":loop fact10="));
+  Serial.println(fact10);
+}
+
+void taskRunner()
+{
+  // Pull events
+  SchedulerClass::func_t* task;
+  taskq.pull(task);
+  (*task)();
+}