docs: Add the updated CN translation

Shen7436 · Harshal5 · commit 8d9f3669c763 · 2025-09-30T15:38:38.000+05:30
diff --git a/docs/en/security/security-features-enablement-workflows.rst b/docs/en/security/security-features-enablement-workflows.rst
@@ -485,7 +485,7 @@ In this workflow we shall use ``espsecure`` tool to generate signing keys and us
         :SOC_EFUSE_DIS_USB_JTAG: - ``DIS_USB_JTAG``: Disable USB switch to JTAG.
         :SOC_EFUSE_DIS_PAD_JTAG: - ``DIS_PAD_JTAG``: Disable JTAG permanently.
         :SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS: - ``SECURE_BOOT_AGGRESSIVE_REVOKE``: Aggressive revocation of key digests, see :ref:`secure-boot-v2-aggressive-key-revocation` for more details.
-        :SOC_ECDSA_P192_CURVE_DEFAULT_DISABLED: - ``WR_DIS_ECDSA_CURVE_MODE``: Disable writing to the ECDSA curve mode eFuse bit (As this write protection bit is shared with ECC_FORCE_CONST_TIME, it is recommended to write protect this bit only after configuring the ECC_FORCE_CONST_TIME efuse).
+        :SOC_ECDSA_P192_CURVE_DEFAULT_DISABLED: - ``WR_DIS_ECDSA_CURVE_MODE``: Disable writing to the ECDSA curve mode eFuse bit. As this write protection bit is shared with ``ECC_FORCE_CONST_TIME``, it is recommended to write protect this bit only after configuring the ``ECC_FORCE_CONST_TIME`` eFuse.
 
     The respective eFuses can be burned by running:
 
diff --git a/docs/zh_CN/security/security-features-enablement-workflows.rst b/docs/zh_CN/security/security-features-enablement-workflows.rst
@@ -485,6 +485,7 @@ flash 加密指南
         :SOC_EFUSE_DIS_USB_JTAG: - ``DIS_USB_JTAG``：禁止从 USB 切换到 JTAG
         :SOC_EFUSE_DIS_PAD_JTAG: - ``DIS_PAD_JTAG``：永久禁用 JTAG。
         :SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS: - ``SECURE_BOOT_AGGRESSIVE_REVOKE``：主动吊销密钥摘要。详请请参阅 :ref:`secure-boot-v2-aggressive-key-revocation`。
+        :SOC_ECDSA_P192_CURVE_DEFAULT_DISABLED: - ``WR_DIS_ECDSA_CURVE_MODE``：禁止写入 ECDSA 曲线模式的 eFuse 位。由于此写保护位与 ``ECC_FORCE_CONST_TIME`` 共享，建议先配置好 ``ECC_FORCE_CONST_TIME`` eFuse 字段后，再设置此写保护位）。
 
     运行以下命令烧录相应的 eFuse：
 
