Values are missing while reading

[Mshanti113]

Hii Dhar,

I am working on interfacing of ATM90E36 with ESP32. As per the your library, interfacing was successfully carried out. However, while reading the data (only three phase voltage and frequency), some of data getting missed and showed zero.
Data as follows:
21:02:44.123 -> VA:249.04V
21:02:44.123 -> VB:249.60V
21:02:44.123 -> VC:249.36V
21:02:44.123 -> IA:0.00A
21:02:44.123 -> IB:26.41A
21:02:44.123 -> IC:0.00A
21:02:44.157 -> f49.90Hz
21:02:45.142 -> S0:0x0
21:02:45.142 -> S1:0x0
21:02:45.176 -> E0:0x3466
21:02:45.176 -> E1:0x0
21:02:45.176 -> VA:249.16V
21:02:45.176 -> VB:249.72V
21:02:45.176 -> VC:249.48V
21:02:45.176 -> IA:0.00A
21:02:45.176 -> IB:0.00A
21:02:45.176 -> IC:0.00A
21:02:45.210 -> f49.90Hz
21:02:48.334 -> S0:0x0
21:02:48.334 -> S1:0x0
21:02:48.368 -> E0:0x0
21:02:48.368 -> E1:0x0
21:02:48.368 -> VA:249.26V
21:02:48.368 -> VB:249.82V
21:02:48.368 -> VC:249.58V
21:02:48.368 -> IA:0.00A
21:02:48.368 -> IB:0.00A
21:02:48.368 -> IC:0.00A
21:02:48.402 -> f49.90Hz
21:02:49.389 -> S0:0x0
21:02:49.423 -> S1:0x0
21:02:49.423 -> E0:0x0
21:02:49.423 -> E1:0x0
21:02:49.423 -> VA:249.28V
21:02:49.423 -> VB:249.85V
21:02:49.423 -> VC:249.61V
21:02:49.423 -> IA:0.00A
21:02:49.457 -> IB:0.00A
21:02:49.457 -> IC:0.00A
21:02:49.457 -> f49.91Hz
21:02:50.475 -> S0:0x0
21:02:50.475 -> S1:0x0
21:02:50.475 -> E0:0x0
21:02:50.475 -> E1:0x0
21:02:50.475 -> VA:249.26V
21:02:50.508 -> VB:249.82V
21:02:50.508 -> VC:249.58V
21:02:50.508 -> IA:0.00A
21:02:50.508 -> IB:0.00A
21:02:50.508 -> IC:0.00A
21:02:50.508 -> f49.91Hz
21:02:51.527 -> S0:0x0
21:02:51.527 -> S1:0x0
21:02:51.527 -> E0:0x55
21:02:51.561 -> E1:0x0
21:02:51.561 -> VA:249.16V
21:02:51.561 -> VB:249.72V
21:02:51.561 -> VC:249.48V
21:02:51.561 -> IA:0.01A
21:02:51.561 -> IB:0.00A
21:02:51.561 -> IC:0.00A
21:02:51.595 -> f49.91Hz
21:02:54.720 -> S0:0x0
21:02:54.720 -> S1:0x0
21:02:54.720 -> E0:0x0
21:02:54.754 -> E1:0x0
21:02:54.754 -> VA:249.12V
21:02:54.754 -> VB:249.69V
21:02:54.754 -> VC:195.56V
21:02:54.754 -> IA:0.00A
21:02:54.754 -> IB:0.00A
21:02:54.754 -> IC:0.00A
21:02:54.788 -> f0.00Hz (here frequency missed)
21:02:55.774 -> S0:0x0
21:02:55.774 -> S1:0x0
21:02:55.809 -> E0:0x0
21:02:55.809 -> E1:0x0
21:02:55.809 -> VA:249.03V
21:02:55.809 -> VB:0.00V (here voltage missed)
21:02:55.809 -> VC:0.00V (here frequency missed)
21:02:55.809 -> IA:0.00A
21:02:55.809 -> IB:0.00A
21:02:55.809 -> IC:0.00A
21:02:55.842 -> f49.91Hz
21:02:56.826 -> S0:0x0
21:02:56.860 -> S1:0x0
21:02:56.860 -> E0:0x0
21:02:56.860 -> E1:0x0
21:02:56.860 -> VA:249.03V
21:02:56.860 -> VB:249.59V
21:02:56.860 -> VC:249.35V
21:02:56.894 -> IA:0.00A
21:02:56.894 -> IB:0.00A
21:02:56.894 -> IC:0.00A
21:02:56.894 -> f0.00Hz (here Frequency missed)
1:02:56.826 -> S0:0x0
21:02:56.860 -> S1:0x0
21:02:56.860 -> E0:0x0
21:02:56.860 -> E1:0x0
21:02:56.860 -> VA:249.03V
21:02:56.860 -> VB:249.59V
21:02:56.860 -> VC:249.35V
21:02:56.894 -> IA:0.00A
21:02:56.894 -> IB:0.00A
21:02:56.894 -> IC:0.00A
21:02:56.894 -> f0.00Hz (here Frequency missed)
21:02:57.913 -> S0:0x0
21:02:57.913 -> S1:0x0
21:02:57.913 -> E0:0x0
21:02:57.947 -> E1:0x0
21:02:57.947 -> VA:0.00V (here voltage missed)
21:02:57.947 -> VB:19.03V (here voltage missed)
21:02:57.947 -> VC:0.00V (here voltage missed)
21:02:57.947 -> IA:0.00A
21:02:57.947 -> IB:0.00A
21:02:57.947 -> IC:0.00A
21:02:57.947 -> f0.00Hz
21:02:58.965 -> S0:0x0
21:02:58.965 -> S1:0x0
21:02:58.999 -> E0:0x0
21:02:58.999 -> E1:0x0
21:02:58.999 -> VA:0.00V (here voltage missed)
21:02:58.999 -> VB:0.00V (here voltage missed)
21:02:58.999 -> VC:0.00V (here voltage missed)
21:02:58.999 -> IA:0.00A
21:02:58.999 -> IB:0.00A
21:02:58.999 -> IC:0.00A
21:02:59.033 -> f49.91Hz
21:03:00.018 -> S0:0x0
21:03:00.052 -> S1:0x0
21:03:00.052 -> E0:0x4000
21:03:00.052 -> E1:0x0
21:03:00.052 -> VA:321.65V
21:03:00.052 -> VB:249.59V
21:03:00.052 -> VC:249.35V
21:03:00.052 -> IA:0.00A
21:03:00.052 -> IB:0.00A
21:03:00.086 -> IC:0.00A
21:03:00.086 -> f5.12Hz (here Frequency wrong value missed)
21:03:01.106 -> S0:0x0
21:03:01.106 -> S1:0x0
21:03:01.106 -> E0:0x0
21:03:01.106 -> E1:0x0
21:03:01.106 -> VA:0.00V (here voltage missed)
21:03:01.106 -> VB:0.00V (here voltage missed)
21:03:01.140 -> VC:288.52V
21:03:01.140 -> IA:0.00A
21:03:01.140 -> IB:0.00A
21:03:01.140 -> IC:0.00A
21:03:01.140 -> f49.91Hz

and its repeating as cycle but most of time we are able to get the value but only some time it is missing.
Could you help me out to rectify this issue?

Thanks in Advance!

[amarranade]

Hii Dhar,

I am working on interfacing of ATM90E36 with ESP32. As per the your library, interfacing was successfully carried out. However, while reading the data (only three phase voltage and frequency), some of data getting missed and showed zero.
Data as follows:
21:02:44.123 -> VA:249.04V
21:02:44.123 -> VB:249.60V
21:02:44.123 -> VC:249.36V
21:02:44.123 -> IA:0.00A
21:02:44.123 -> IB:26.41A
21:02:44.123 -> IC:0.00A
21:02:44.157 -> f49.90Hz
21:02:45.142 -> S0:0x0
21:02:45.142 -> S1:0x0
21:02:45.176 -> E0:0x3466
21:02:45.176 -> E1:0x0
21:02:45.176 -> VA:249.16V
21:02:45.176 -> VB:249.72V
21:02:45.176 -> VC:249.48V
21:02:45.176 -> IA:0.00A
21:02:45.176 -> IB:0.00A
21:02:45.176 -> IC:0.00A
21:02:45.210 -> f49.90Hz
21:02:48.334 -> S0:0x0
21:02:48.334 -> S1:0x0
21:02:48.368 -> E0:0x0
21:02:48.368 -> E1:0x0
21:02:48.368 -> VA:249.26V
21:02:48.368 -> VB:249.82V
21:02:48.368 -> VC:249.58V
21:02:48.368 -> IA:0.00A
21:02:48.368 -> IB:0.00A
21:02:48.368 -> IC:0.00A
21:02:48.402 -> f49.90Hz
21:02:49.389 -> S0:0x0
21:02:49.423 -> S1:0x0
21:02:49.423 -> E0:0x0
21:02:49.423 -> E1:0x0
21:02:49.423 -> VA:249.28V
21:02:49.423 -> VB:249.85V
21:02:49.423 -> VC:249.61V
21:02:49.423 -> IA:0.00A
21:02:49.457 -> IB:0.00A
21:02:49.457 -> IC:0.00A
21:02:49.457 -> f49.91Hz
21:02:50.475 -> S0:0x0
21:02:50.475 -> S1:0x0
21:02:50.475 -> E0:0x0
21:02:50.475 -> E1:0x0
21:02:50.475 -> VA:249.26V
21:02:50.508 -> VB:249.82V
21:02:50.508 -> VC:249.58V
21:02:50.508 -> IA:0.00A
21:02:50.508 -> IB:0.00A
21:02:50.508 -> IC:0.00A
21:02:50.508 -> f49.91Hz
21:02:51.527 -> S0:0x0
21:02:51.527 -> S1:0x0
21:02:51.527 -> E0:0x55
21:02:51.561 -> E1:0x0
21:02:51.561 -> VA:249.16V
21:02:51.561 -> VB:249.72V
21:02:51.561 -> VC:249.48V
21:02:51.561 -> IA:0.01A
21:02:51.561 -> IB:0.00A
21:02:51.561 -> IC:0.00A
21:02:51.595 -> f49.91Hz
21:02:54.720 -> S0:0x0
21:02:54.720 -> S1:0x0
21:02:54.720 -> E0:0x0
21:02:54.754 -> E1:0x0
21:02:54.754 -> VA:249.12V
21:02:54.754 -> VB:249.69V
21:02:54.754 -> VC:195.56V
21:02:54.754 -> IA:0.00A
21:02:54.754 -> IB:0.00A
21:02:54.754 -> IC:0.00A
21:02:54.788 -> f0.00Hz (here frequency missed)
21:02:55.774 -> S0:0x0
21:02:55.774 -> S1:0x0
21:02:55.809 -> E0:0x0
21:02:55.809 -> E1:0x0
21:02:55.809 -> VA:249.03V
21:02:55.809 -> VB:0.00V (here voltage missed)
21:02:55.809 -> VC:0.00V (here frequency missed)
21:02:55.809 -> IA:0.00A
21:02:55.809 -> IB:0.00A
21:02:55.809 -> IC:0.00A
21:02:55.842 -> f49.91Hz
21:02:56.826 -> S0:0x0
21:02:56.860 -> S1:0x0
21:02:56.860 -> E0:0x0
21:02:56.860 -> E1:0x0
21:02:56.860 -> VA:249.03V
21:02:56.860 -> VB:249.59V
21:02:56.860 -> VC:249.35V
21:02:56.894 -> IA:0.00A
21:02:56.894 -> IB:0.00A
21:02:56.894 -> IC:0.00A
21:02:56.894 -> f0.00Hz (here Frequency missed)
1:02:56.826 -> S0:0x0
21:02:56.860 -> S1:0x0
21:02:56.860 -> E0:0x0
21:02:56.860 -> E1:0x0
21:02:56.860 -> VA:249.03V
21:02:56.860 -> VB:249.59V
21:02:56.860 -> VC:249.35V
21:02:56.894 -> IA:0.00A
21:02:56.894 -> IB:0.00A
21:02:56.894 -> IC:0.00A
21:02:56.894 -> f0.00Hz (here Frequency missed)
21:02:57.913 -> S0:0x0
21:02:57.913 -> S1:0x0
21:02:57.913 -> E0:0x0
21:02:57.947 -> E1:0x0
21:02:57.947 -> VA:0.00V (here voltage missed)
21:02:57.947 -> VB:19.03V (here voltage missed)
21:02:57.947 -> VC:0.00V (here voltage missed)
21:02:57.947 -> IA:0.00A
21:02:57.947 -> IB:0.00A
21:02:57.947 -> IC:0.00A
21:02:57.947 -> f0.00Hz
21:02:58.965 -> S0:0x0
21:02:58.965 -> S1:0x0
21:02:58.999 -> E0:0x0
21:02:58.999 -> E1:0x0
21:02:58.999 -> VA:0.00V (here voltage missed)
21:02:58.999 -> VB:0.00V (here voltage missed)
21:02:58.999 -> VC:0.00V (here voltage missed)
21:02:58.999 -> IA:0.00A
21:02:58.999 -> IB:0.00A
21:02:58.999 -> IC:0.00A
21:02:59.033 -> f49.91Hz
21:03:00.018 -> S0:0x0
21:03:00.052 -> S1:0x0
21:03:00.052 -> E0:0x4000
21:03:00.052 -> E1:0x0
21:03:00.052 -> VA:321.65V
21:03:00.052 -> VB:249.59V
21:03:00.052 -> VC:249.35V
21:03:00.052 -> IA:0.00A
21:03:00.052 -> IB:0.00A
21:03:00.086 -> IC:0.00A
21:03:00.086 -> f5.12Hz (here Frequency wrong value missed)
21:03:01.106 -> S0:0x0
21:03:01.106 -> S1:0x0
21:03:01.106 -> E0:0x0
21:03:01.106 -> E1:0x0
21:03:01.106 -> VA:0.00V (here voltage missed)
21:03:01.106 -> VB:0.00V (here voltage missed)
21:03:01.140 -> VC:288.52V
21:03:01.140 -> IA:0.00A
21:03:01.140 -> IB:0.00A
21:03:01.140 -> IC:0.00A
21:03:01.140 -> f49.91Hz

and its repeating as cycle but most of time we are able to get the value but only some time it is missing.
Could you help me out to rectify this issue?

Thanks in Advance!

Hey , just wanted to check with you if you were able to get energy consumption values? If you were able to successfully compute energy, I'd like you to look into the issue I am facing(Getting 0). I've elaborated it under issues section of the same thread. Thanks

[whatnick]

Yes I have the DIN rail energy monitor project which successfully computes energy. As does work from CircuitSetup who is the current maintainer.

[Mshanti113]

Hi,
Thanks for your query.
Currently I am working on this problem and able to calibrate all values using changing the resistors values. So far got very accurate voltage, current, PF and other power values and values calibrated using CAL SOURCE 200 (standard source for calibration). Now, I will look into the energy data as requested by you and soon will be posted here.

Let me know if need any further help.

With regards
MK

[amarranade]

CAL SOURCE 200

Hey @Mshanti113
Thanks for the response.

Any luck in getting the energy values ?
I am not able to get just the energy readings from ATMEL IC. Rest all values are getting computed nicely,

Thanks and regards

[Mshanti113]

Hey @ amarranade

Hope you are doing well!

Any luck in getting the energy values ?

Regards,
MK

[amarranade]

Hi I couldn't resolve the issue. Good luck to you !

…

On Wed, 26 Jan, 2022, 9:06 pm Mshanti113, ***@***.***> wrote: Hey @ amarranade Hope you are doing well! Any luck in getting the energy values ? Regards, MK — Reply to this email directly, view it on GitHub <#6 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGXRONRLT6E3TXMZL2EZUA3UYAIGLANCNFSM4MDHCP5Q> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you commented.Message ID: ***@***.***>

[what-krishna01]

Hii Dhar,

I am working on interfacing of ATM90E36 with ESP32. As per the your library, interfacing was successfully carried out. However, while reading the data (only three phase voltage and frequency), some of data getting missed and showed zero. Data as follows: 21:02:44.123 -> VA:249.04V 21:02:44.123 -> VB:249.60V 21:02:44.123 -> VC:249.36V 21:02:44.123 -> IA:0.00A 21:02:44.123 -> IB:26.41A 21:02:44.123 -> IC:0.00A 21:02:44.157 -> f49.90Hz 21:02:45.142 -> S0:0x0 21:02:45.142 -> S1:0x0 21:02:45.176 -> E0:0x3466 21:02:45.176 -> E1:0x0 21:02:45.176 -> VA:249.16V 21:02:45.176 -> VB:249.72V 21:02:45.176 -> VC:249.48V 21:02:45.176 -> IA:0.00A 21:02:45.176 -> IB:0.00A 21:02:45.176 -> IC:0.00A 21:02:45.210 -> f49.90Hz 21:02:48.334 -> S0:0x0 21:02:48.334 -> S1:0x0 21:02:48.368 -> E0:0x0 21:02:48.368 -> E1:0x0 21:02:48.368 -> VA:249.26V 21:02:48.368 -> VB:249.82V 21:02:48.368 -> VC:249.58V 21:02:48.368 -> IA:0.00A 21:02:48.368 -> IB:0.00A 21:02:48.368 -> IC:0.00A 21:02:48.402 -> f49.90Hz 21:02:49.389 -> S0:0x0 21:02:49.423 -> S1:0x0 21:02:49.423 -> E0:0x0 21:02:49.423 -> E1:0x0 21:02:49.423 -> VA:249.28V 21:02:49.423 -> VB:249.85V 21:02:49.423 -> VC:249.61V 21:02:49.423 -> IA:0.00A 21:02:49.457 -> IB:0.00A 21:02:49.457 -> IC:0.00A 21:02:49.457 -> f49.91Hz 21:02:50.475 -> S0:0x0 21:02:50.475 -> S1:0x0 21:02:50.475 -> E0:0x0 21:02:50.475 -> E1:0x0 21:02:50.475 -> VA:249.26V 21:02:50.508 -> VB:249.82V 21:02:50.508 -> VC:249.58V 21:02:50.508 -> IA:0.00A 21:02:50.508 -> IB:0.00A 21:02:50.508 -> IC:0.00A 21:02:50.508 -> f49.91Hz 21:02:51.527 -> S0:0x0 21:02:51.527 -> S1:0x0 21:02:51.527 -> E0:0x55 21:02:51.561 -> E1:0x0 21:02:51.561 -> VA:249.16V 21:02:51.561 -> VB:249.72V 21:02:51.561 -> VC:249.48V 21:02:51.561 -> IA:0.01A 21:02:51.561 -> IB:0.00A 21:02:51.561 -> IC:0.00A 21:02:51.595 -> f49.91Hz 21:02:54.720 -> S0:0x0 21:02:54.720 -> S1:0x0 21:02:54.720 -> E0:0x0 21:02:54.754 -> E1:0x0 21:02:54.754 -> VA:249.12V 21:02:54.754 -> VB:249.69V 21:02:54.754 -> VC:195.56V 21:02:54.754 -> IA:0.00A 21:02:54.754 -> IB:0.00A 21:02:54.754 -> IC:0.00A 21:02:54.788 -> f0.00Hz (here frequency missed) 21:02:55.774 -> S0:0x0 21:02:55.774 -> S1:0x0 21:02:55.809 -> E0:0x0 21:02:55.809 -> E1:0x0 21:02:55.809 -> VA:249.03V 21:02:55.809 -> VB:0.00V (here voltage missed) 21:02:55.809 -> VC:0.00V (here frequency missed) 21:02:55.809 -> IA:0.00A 21:02:55.809 -> IB:0.00A 21:02:55.809 -> IC:0.00A 21:02:55.842 -> f49.91Hz 21:02:56.826 -> S0:0x0 21:02:56.860 -> S1:0x0 21:02:56.860 -> E0:0x0 21:02:56.860 -> E1:0x0 21:02:56.860 -> VA:249.03V 21:02:56.860 -> VB:249.59V 21:02:56.860 -> VC:249.35V 21:02:56.894 -> IA:0.00A 21:02:56.894 -> IB:0.00A 21:02:56.894 -> IC:0.00A 21:02:56.894 -> f0.00Hz (here Frequency missed) 1:02:56.826 -> S0:0x0 21:02:56.860 -> S1:0x0 21:02:56.860 -> E0:0x0 21:02:56.860 -> E1:0x0 21:02:56.860 -> VA:249.03V 21:02:56.860 -> VB:249.59V 21:02:56.860 -> VC:249.35V 21:02:56.894 -> IA:0.00A 21:02:56.894 -> IB:0.00A 21:02:56.894 -> IC:0.00A 21:02:56.894 -> f0.00Hz (here Frequency missed) 21:02:57.913 -> S0:0x0 21:02:57.913 -> S1:0x0 21:02:57.913 -> E0:0x0 21:02:57.947 -> E1:0x0 21:02:57.947 -> VA:0.00V (here voltage missed) 21:02:57.947 -> VB:19.03V (here voltage missed) 21:02:57.947 -> VC:0.00V (here voltage missed) 21:02:57.947 -> IA:0.00A 21:02:57.947 -> IB:0.00A 21:02:57.947 -> IC:0.00A 21:02:57.947 -> f0.00Hz 21:02:58.965 -> S0:0x0 21:02:58.965 -> S1:0x0 21:02:58.999 -> E0:0x0 21:02:58.999 -> E1:0x0 21:02:58.999 -> VA:0.00V (here voltage missed) 21:02:58.999 -> VB:0.00V (here voltage missed) 21:02:58.999 -> VC:0.00V (here voltage missed) 21:02:58.999 -> IA:0.00A 21:02:58.999 -> IB:0.00A 21:02:58.999 -> IC:0.00A 21:02:59.033 -> f49.91Hz 21:03:00.018 -> S0:0x0 21:03:00.052 -> S1:0x0 21:03:00.052 -> E0:0x4000 21:03:00.052 -> E1:0x0 21:03:00.052 -> VA:321.65V 21:03:00.052 -> VB:249.59V 21:03:00.052 -> VC:249.35V 21:03:00.052 -> IA:0.00A 21:03:00.052 -> IB:0.00A 21:03:00.086 -> IC:0.00A 21:03:00.086 -> f5.12Hz (here Frequency wrong value missed) 21:03:01.106 -> S0:0x0 21:03:01.106 -> S1:0x0 21:03:01.106 -> E0:0x0 21:03:01.106 -> E1:0x0 21:03:01.106 -> VA:0.00V (here voltage missed) 21:03:01.106 -> VB:0.00V (here voltage missed) 21:03:01.140 -> VC:288.52V 21:03:01.140 -> IA:0.00A 21:03:01.140 -> IB:0.00A 21:03:01.140 -> IC:0.00A 21:03:01.140 -> f49.91Hz

and its repeating as cycle but most of time we are able to get the value but only some time it is missing. Could you help me out to rectify this issue?

Thanks in Advance!

hii @Mshanti113
can you please help me too getting data .?
Regards Krishna

[Mshanti113]

Hii,

We got the result and currently using this as of our fine product for real time energy monitoring product.

Email me: mukesh.seep@gmail.com with screenshot of your problem/code.

With regards,