CI Guidelines

Workflow triggers

Each workflow should serve a distinct purpose with a distinct trigger pattern. Avoid duplicating workflows that fire on the same events — merge them instead.

Trigger ladder (fastest feedback to most comprehensive):

Stage	Trigger	Suitable for
All commits	push to main/release/**, pull_request on ready_for_review/synchronize	Lint, build, fast unit tests
Merge queue	merge_group	Full test suite, race tests, integration tests
Scheduled	schedule	Flaky-test discovery, regression detection, QA

Run tests that developers can reproduce locally as late as possible — ideally only in the merge queue. This avoids burning runner time on every push and concentrates deterministic blocking checks at the point where they matter most.

All workflows should include workflow_dispatch so they can be triggered manually without code changes. For workflows with inputs (e.g. QA), use dispatch inputs instead of separate workflow files.

Draft PRs

If a job uses if: ${{ !github.event.pull_request.draft }} to skip on draft PRs, the workflow must include ready_for_review in its pull_request event types:

on:
  pull_request:
    types:
      - opened
      - reopened
      - synchronize
      - ready_for_review

Without ready_for_review, converting a draft PR to ready-for-review fires an event the workflow doesn't subscribe to, so the job never runs — the PR appears to have skipped CI until the next push.

CI gate and workflow_call

All PR and merge-queue checks run through .github/workflows/ci-gate.yml. It calls each sub-workflow via uses: (reusable workflow call) rather than inlining the job definitions. This avoids duplicating job definitions that also appear in standalone push/schedule runs.

Use workflow_call: on a workflow (and call it from ci-gate) when the workflow has other triggers besides PRs — push to main, schedule, etc. — so there is one source of truth for the job definition.

Only inline job definitions directly into ci-gate if the workflow is exclusively PR-gated with no other triggers, since there is then no duplication concern.

Workflows called by ci-gate must not have pull_request: triggers — ci-gate owns PR coverage and a pull_request: trigger would cause every job to run twice.

ci-gate has a workflow-level concurrency: group that cancels the entire previous run (all sub-workflow jobs) when a new PR push or merge_group event arrives. Sub- workflows called via workflow_call must not define their own job-level concurrency: for this purpose — github.workflow and github.job resolve to the caller's values (or empty) in a workflow_call context, which causes collisions that cancel sibling jobs within the same run.

Required checks and path filters

Required checks must always report a status or they block the PR indefinitely. Do not use workflow-level paths/paths-ignore on workflows with required checks. Instead, use a step-level filter (e.g. dorny/paths-filter) so the job always runs and can report "skipped" rather than going missing.

Runtime goals

Run type	Target
Cached (source unchanged)	< 5 minutes
Cold / no cache	≤ 30 minutes

If a job regularly exceeds 30 minutes cold, fix the underlying cause — don't just raise the timeout:

• Split large packages into smaller ones so Go's test cache works at finer granularity.
• Break a single large job into parallel jobs.
• Move slow tests to the merge queue so they don't block developer iteration.

PRs that make tests significantly slower should include workflow changes to compensate.

Go test caching

Go's test cache keys each package result by the compiled test binary hash plus the mtime/size of every file the test opens at runtime. A single file with a wrong mtime invalidates the cache for the entire package.

Fixture mtimes

Main repo fixtures — run git restore-mtime over testdata paths so each file's mtime equals the commit that last modified it. This is deterministic and content-sensitive.

Submodule fixtures — shallow clones (--depth 1) don't have enough history for git restore-mtime. Instead, set every file's mtime to the submodule's HEAD commit timestamp. All files in a submodule share the same mtime, which is stable as long as the pinned commit doesn't change.

Directory mtimes — normalize all directories to a fixed epoch (e.g. 200902132331.30). Git doesn't track directory mtimes, so without this step they reflect checkout time, which varies between runs.

Keeping packages small

Go caches test results at the package level. A package with hundreds of test cases that reads many fixture files will miss the cache if any fixture changes. Splitting it into sub-packages (one per fixture set) means unrelated fixtures don't cause unnecessary re-runs.

This is also why the execution/tests/ package is broken into focused sub-packages rather than one monolithic package.

Cache warming and GitHub's cache isolation rules

GitHub Actions caches are scoped by branch. A workflow run can restore caches from:

1. Its own branch — caches saved by earlier runs on the same branch.
2. The base branch (main) — caches saved by any workflow run on main.

It cannot access caches from other PRs or other branches.

The cold-start problem — If a workflow only triggers on pull_request, it never runs on main and therefore never populates the base-branch cache. Every new PR opens to a cold cache, even if the codebase hasn't changed at all. Subsequent pushes to the same PR do find each other's caches, but only until the GitHub-hosted cache is evicted (repos share a 10 GB limit; busy repos evict older entries within hours).

The fix — add push: {branches: [main, release/**]} as a trigger. After each merge, a run warms the build and module caches on main. All future PR first-pushes restore from that warm base-branch cache instead of starting cold.

Cache warming without test validation — For workflows where correctness is already enforced by the merge queue, the push-to-main run exists purely for cache warming. To prevent benchmark or test flakiness from showing as failures on main commits, use compile-only steps on non-PR events:

- name: Run benchmarks
  if: github.event_name == 'pull_request'
  run: make test-bench

- name: Build test binaries (cache warming)
  if: github.event_name != 'pull_request'
  run: go test -run=^$ ./...

go test -run=^$ compiles every test binary (identical GOCACHE entries to a full run) but executes nothing. The job always succeeds, and the commit on main shows green. If a benchmark were broken post-merge it would have been caught by the PR or merge queue run before landing.

Merge queues — merge_group runs use a temporary synthetic branch (refs/heads/gh-readonly-queue/main/pr-N-SHA). They can read from the base-branch (main) cache, so they benefit from the warm cache created by the push trigger. However, caches saved during a merge-group run are stored under that temporary branch and become inaccessible once the merge group completes — they do not contribute to the main cache. Only the push-triggered run after the merge creates a durable base-branch cache.

Implication for workflow design: any workflow that should benefit from caching across PRs and merge queue runs needs a push trigger on main (or a nightly schedule on main). Without it, each PR and each merge-queue batch is always a cold start.

Required checks

Required checks exist to block regressions, not to enforce perfection.

• Don't add a required check for a test that is already flaky. Quarantine flaky tests first (skip them, move them to a scheduled run, or fix them), then make the check required.
• Checks must not be time-sensitive. A test that passed yesterday on the same code should pass today. Non-deterministic failures (timing, network, external state) must not be required.
• Required checks should run on pull_request or merge_group, never only on push to main. Checking after merge is too late — it creates a broken main that blocks everyone else.

Flaky tests

Flaky tests should be discovered on scheduled runs that repeat the test suite, not tolerated silently in required checks. When a flaky test is identified:

1. Skip or quarantine it so it no longer blocks PRs.
2. File a bug and fix it separately.
3. Re-enable it as a required check once it is stable.

Memory- and disk-intensive tests

Some test packages allocate large databases or hold many files open simultaneously. Running too many of them in parallel can exhaust RAM or IOPS and cause OOM kills or spurious timeouts.

Use -p to limit the number of packages tested in parallel (default: GOMAXPROCS), and -parallel to limit concurrency within a single package (default: GOMAXPROCS):

# At most 2 packages at a time, at most 4 subtests in parallel within each
go test -p 2 -parallel 4 ./...

These flags can be passed via GO_FLAGS in the Makefile:

make test-all GO_FLAGS="-p 2 -parallel 4"

Consider setting tighter defaults in the workflow matrix for jobs that are known to be memory- or disk-heavy, rather than working around pressure by adjusting unrelated constraints like timeouts or GC tuning.

Local reproducibility

Every CI job should have a local equivalent so developers can pre-check before pushing. If you're changing code in execution/, you should be able to run the corresponding test group locally (make test-group TEST_GROUP=execution-tests) and get the same result as CI.

CI workflows should use the same Makefile targets that developers use locally (e.g. make test-group, make lint) rather than inline shell commands. This keeps CI and local test runs as similar as possible, reducing "works locally but fails in CI" surprises.

Tests that can be reproduced locally should preferably only block in the merge queue, not on every PR push — this avoids burning runner time on checks developers can run themselves.

Debugging

Re-run with debug logging:

gh run rerun <run-id> --debug

Or in the UI: "Re-run jobs" → enable "Debug logging".

Raw logs include per-line timestamps useful for profiling slow steps:

gh run view <run-id> --log