Skip to content

[Accton AS9737-32DB] Upgradge Linux kernel version to 6.1 #91

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Merged
akenliu merged 2 commits into from
Dec 2, 2025
Merged

[Accton AS9737-32DB] Upgradge Linux kernel version to 6.1 #91

akenliu merged 2 commits into from
Dec 2, 2025

Conversation

@vincentchiang-ec
Copy link

@vincentchiang-ec vincentchiang-ec commented Dec 1, 2025

vincentchiang-ec and others added 2 commits December 1, 2025 01:21
@vincentchiang-ec @acctalex
Add new platform Accton AS9737-32DB
fe0203a 
CPU: Intel ICX-D D-1713NTE 4 cores
FLASH: SPI FLASH 512Mb x 2
RAM: DDR4 16GB x2 SO-DIMM
SSD: M.2 MLC 128GB X 1(114.473GB could be used)
Switch: Broadcom BCM56993
Ethernet Port (400G): 400G QSFP56-DD port x 32
Ethernet Port (10G): 10G SFP+ X1
EMP PHY: I210AT
Management Port 1G: 1G RJ45 port x 1, 1G SFP port x 1
Console: RJ45 type RS232 x 1 or Micro USB x1
USB: Type-A USB 3.0 port x 1
CPU Embedded Controller (EC): IT5121
Switch CPLD: Altera Cyclone IV EP4CGX30CF23C7N X1, Altera MAX V 5M2210ZF324I5N X2
Fan CPLD: Altera 5M2210ZF256C5N x1
TPM Moudle: Infineon SLB9670XQ2.0FW7.63
Port LED(QSFP56-DD): One Tri-color LED and Three Green LED per port
Port LED(SFP+/SFP): Two bi-color LEDs per port
Push Button: One push button for reset at front panel
PTP Clock: 1PPS SMB connector Input/output
CPU PCB: 125mm x 95mm x 3.3mm 24 Layers
Mainboard PCB: 429.5mm x 269mmx4.0mm, 24 Layers
Fan board PCB: 281.43mm x 57.9mmx2.36mm, 6 Layers
Bridge board PCB: 262.62mmx 24mm x 1.6mm, 4 Layers.
COM-e Carrier board PCB: 125.5mmX60mmX3.22mm 14 Layers
Mechanical Dimension: 17.26” x 23.23” x 1U (438.4x590x43.5mm)
PSU: 1+1 Redundant/hot swappable 1500W AC/DC PSU (C14 ac inlet)
System Cooling: 5+1 fan-tray modules with 40mm x40mm x 56mm 12V fans, hot-swappable
System Air Flow: AFO: Port-to-Power airflow / AFI: Power-to-Port airflow

Signed-off-by: Alex Lai <alex_lai@accton.com>
Co-authored-by: Alex Lai <alex_lai@accton.com>
@vincentchiang-ec
[Accton AS9737-32DB] Upgradge Linux kernel version to 6.1
b6ae8cb 
- The PKG.yml and Makefile under modules, change to onl-kernel-6.1-lts-x86-64-all.
- The x86-64-accton-as9737-32db-r0.yml file under platform-config, change to kernel-6-1.
- Modify driver that uses struct i2c_driver, the return type of the remove function of struct i2c_driver is changed from int to void.
- Modify driver that uses hwmon_device_register_with_info(), the fourth parameter (hwmon_chip_info) of hwmon_device_register_with_info() can’t be NULL after changed to kernel 6.1.
- Add to check the main I2C bus ID in the __init__.py because the iSMT driver is enabled, and update the I2C bus ID of CPLD.
- Change BMC version reading path
@akenliu akenliu merged commit 5b17a72 into accton:support_linux_6.1 Dec 2, 2025
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

@akenliu akenliu akenliu approved these changes

Assignees

No one assigned

Labels

None yet

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

2 participants

@vincentchiang-ec @akenliu