[pull] master from veracrypt:master

Translations/Language.ar.xml

@@ -1517,10 +1517,6 @@
     <entry lang="ar" key="LINUX_MOUNTET_HINT">نظام الملفات للجهاز المحدد مثبت حاليًا. يرجى إلغاء تركيب '{0}' قبل المتابعة.</entry>
     <entry lang="ar" key="LINUX_HIDDEN_PASS_NO_DIFF">لا يمكن أن يكون للحجم المخفي نفس كلمة المرور و PIM وملفات المفاتيح للحجم الخارجي</entry>
     <entry lang="ar" key="LINUX_NOT_FAT_HINT">يرجى ملاحظة أن الحجم لن يتم تنسيقه بنظام ملفات FAT، ولهذا السبب، قد تحتاج إلى تثبيت برامج تشغيل لنظام الملفات على منصات غير {0}، والتي ستمكنك من تركيب الحجم.</entry>
-    <entry lang="ar" key="LINUX_ERROR_SIZE_HIDDEN_VOL">خطأ: الحجم المخفي الذي سيتم إنشاؤه أكبر من {0} تيرابايت ({1} جيجابايت).\n\nالحلول الممكنة:\n- إنشاء حاوية / قسم أصغر من {0} تيرابايت.\n</entry>
-    <entry lang="ar" key="LINUX_MAX_SIZE_HINT">- استخدام محرك بأحجام قطاع 4096 بايت لتتمكن من إنشاء أحجام مخفية مستضافة على أقسام / أجهزة تصل إلى 16 تيرابايت</entry>
-    <entry lang="ar" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="ar" key="LINUX_NOT_SUPPORTED">(غير مدعوم بواسطة المكونات المتاحة على هذا النظام).\n</entry>
     <entry lang="ar" key="LINUX_KERNEL_OLD">نظامك يستخدم إصدارًا قديمًا من نواة لينكس.\n\nنظرًا لخلل في نواة لينكس، قد يتوقف نظامك عن الاستجابة عند كتابة البيانات إلى حجم VeraCrypt. يمكن حل هذه المشكلة بترقية النواة إلى الإصدار 2.6.24 أو أحدث.</entry>
     <entry lang="ar" key="LINUX_VOL_UNMOUNTED">تم إلغاء تركيب الحجم {0}.</entry>
     <entry lang="ar" key="LINUX_VOL_MOUNTED">تم تركيب الحجم {0}.</entry>

Translations/Language.be.xml

@@ -1517,10 +1517,6 @@
     <entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
     <entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
     <entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
-    <entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
-    <entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
-    <entry lang="en" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
     <entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
     <entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
     <entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>

Translations/Language.bg.xml

@@ -1517,10 +1517,6 @@
     <entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
     <entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
     <entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
-    <entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
-    <entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
-    <entry lang="en" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
     <entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
     <entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
     <entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>

Translations/Language.ca.xml

@@ -1517,10 +1517,6 @@
     <entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
     <entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
     <entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
-    <entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
-    <entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
-    <entry lang="en" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
     <entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
     <entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
     <entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>

Translations/Language.co.xml

@@ -1539,10 +1539,6 @@ Information about Corsican localization:
 	    <entry lang="co" key="LINUX_MOUNTET_HINT">U sistema di schedarii di l’apparechju selezziunatu hè attualmente muntatu. Smuntate « {0} » prima di cuntinuà.</entry>
 	    <entry lang="co" key="LINUX_HIDDEN_PASS_NO_DIFF">U vulume piattatu ùn pò micca avè i listessi parolla d’intesa, PIM è schedarii chjave chè u vulume esternu</entry>
 	    <entry lang="co" key="LINUX_NOT_FAT_HINT">Sappiate chì u vulume ùn serà micca messu à u furmatu cù un sistema di schedarii FAT è, in cunsequenza, puderia esse bisognu à installà piloti addiziunale di u sistema di schedarii nant’à piattaforme altre chè {0}, ciò chì vi permetterà di muntà u vulume.</entry>
-	    <entry lang="co" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Sbagliu : U vulume piattatu à creà hè più maiò chè {0} To ({1} Go).\n\nSuluzioni pussibule :\n- Creà un cuntenidore o una partizione più chjucu(a) chè {0} To.\n</entry>
-	    <entry lang="co" key="LINUX_MAX_SIZE_HINT">- Impiegà un lettore cù settori di 4096 ottetti per pudè creà vulumi piattati ospitati in una partizione o in un apparechju d’una dimensione sin’à 16 To</entry>
-	    <entry lang="co" key="LINUX_DOT_LF">.\n</entry>
-	    <entry lang="co" key="LINUX_NOT_SUPPORTED">(micca accettatu da i cumpunenti dispunibule nant’à sta piattaforma).\n</entry>
 	    <entry lang="co" key="LINUX_KERNEL_OLD">U vostru sistema impiegheghja una vechja versione di u nocciulu Linux.\n\nPer via d’un prublema in u nocciulu Linux, u vostru sistema puderia piantassi di risponde quandu si scrive i dati nant’à u vulume VeraCrypt. Stu prublema pò esse currettu mittendu à livellu u nocciulu à a versione 2.6.24 o più recente.</entry>
 	    <entry lang="co" key="LINUX_VOL_UNMOUNTED">U vulume {0} hè statu smuntatu.</entry>
 	    <entry lang="co" key="LINUX_VOL_MOUNTED">U vulume {0} hè statu muntatu.</entry>

Translations/Language.cs.xml

@@ -1517,10 +1517,6 @@
     <entry lang="cs" key="LINUX_MOUNTET_HINT">Souborový systém vybraného zařízení je aktuálně připojen. Před pokračováním prosím odpojte '{0}'.</entry>
     <entry lang="cs" key="LINUX_HIDDEN_PASS_NO_DIFF">Skrytý svazek nemůže mít stejné heslo, PIM a klíčové soubory jako vnější svazek</entry>
     <entry lang="cs" key="LINUX_NOT_FAT_HINT">Upozorňujeme, že svazek nebude naformátován systémem souborů FAT, a proto může být nutné na jiných platformách než {0} nainstalovat další ovladače souborového systému, jenž umožní připojení svazku.</entry>
-    <entry lang="cs" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Chyba: Skrytý svazek, který má být vytvořen, je větší než {0} TB ({1} GB).\n\nMožná řešení:\n– Vytvořte kontejner/diskový oddíl menší než {0} TB.\n</entry>
-    <entry lang="cs" key="LINUX_MAX_SIZE_HINT">- Použijte disk s 4096bajtovými sektory, abyste mohli vytvářet skryté svazky s diskovými oddíly/zařízeními o velikosti až 16 TB.</entry>
-    <entry lang="cs" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="cs" key="LINUX_NOT_SUPPORTED"> (není podporováno komponentami dostupnými na této platformě).\n</entry>
     <entry lang="cs" key="LINUX_KERNEL_OLD">Váš systém používá starou verzi linuxového jádra.\n\nV důsledku chyby v linuxovém jádře může systém přestat reagovat při zápisu dat na svazek VeraCryptu. Tento problém lze vyřešit aktualizací jádra na verzi 2.6.24 nebo novější.</entry>
     <entry lang="cs" key="LINUX_VOL_UNMOUNTED">Svazek {0} byl odpojen.</entry>
     <entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>

Translations/Language.da.xml

@@ -1517,10 +1517,6 @@
     <entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
     <entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
     <entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
-    <entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
-    <entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
-    <entry lang="en" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
     <entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
     <entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
     <entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>

Translations/Language.de.xml

@@ -1520,10 +1520,6 @@
     <entry lang="de" key="LINUX_MOUNTET_HINT">Das Dateisystem des gewählten Gerätes ist eingehängt. Bitte hängen Sie '{0}' aus, um fortzufahren.</entry>
     <entry lang="de" key="LINUX_HIDDEN_PASS_NO_DIFF">Das versteckte Volume darf nicht zum äußeren Volume identische Schlüsseldateien, Passwörter und PIM haben.</entry>
     <entry lang="de" key="LINUX_NOT_FAT_HINT">Bitte beachten Sie, dass das Volume nicht mit dem Dateisystem FAT formatiert wird. Deshalb kann die Installation eines Dateisystemtreibers auf anderen Plattformen als '{0}' notwendig sein, um das Volume einzuhängen.</entry>
-    <entry lang="de" key="LINUX_ERROR_SIZE_HIDDEN_VOL">FEHLER: Das zu erstellende versteckte Volume ist größer als {0} TB ({1} GB).\n\nMögliche Lösungen:\n- Erstellen Sie ein Volume/eine Partition kleiner als {0} TB.\n</entry>
-    <entry lang="de" key="LINUX_MAX_SIZE_HINT">- Verwenden Sie ein Laufwerk mit 4096-Byte-Sektoren, um versteckte Partitionen/Geräte mit bis zu 16 TB erstellen zu können</entry>
-    <entry lang="de" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="de" key="LINUX_NOT_SUPPORTED">(wird von den vorhandenen Komponenten dieser Plattform nicht unterstützt).</entry>
     <entry lang="de" key="LINUX_KERNEL_OLD">Ihr System verwendet einen alten Linux-Kernel.\n\nWegen eines Fehlers im Linux-Kernel kann es passieren, dass Ihr System beim Schreiben auf ein VeraCrypt-Volume nicht mehr reagiert. Diese Problem kann durch einen Kernel in Version 2.6.24 oder neuer gelöst werden.</entry>
     <entry lang="de" key="LINUX_VOL_UNMOUNTED">Volume {0} ausgehängt.</entry>
     <entry lang="de" key="LINUX_VOL_MOUNTED">Volume {0} wurde eingehängt.</entry>

Translations/Language.el.xml

@@ -1517,10 +1517,6 @@
     <entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
     <entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
     <entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
-    <entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
-    <entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
-    <entry lang="en" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
     <entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
     <entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
     <entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>

Translations/Language.es.xml

@@ -1517,10 +1517,6 @@
     <entry lang="es" key="LINUX_MOUNTET_HINT">El sistema de archivos del dispositivo seleccionado está actualmente montado. Por favor, desmonte '{0}' antes de continuar.</entry>
     <entry lang="es" key="LINUX_HIDDEN_PASS_NO_DIFF">El volumen oculto no puede tener la misma contraseña, PIM y archivos de clave que el volumen externo</entry>
     <entry lang="es" key="LINUX_NOT_FAT_HINT">Tenga en cuenta que el volumen no será formateado con un sistema de archivos FAT y, por lo tanto, puede ser necesario instalar controladores de sistema de archivos adicionales en plataformas distintas a {0}, lo que le permitirá montar el volumen.</entry>
-    <entry lang="es" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: El volumen oculto a crear es mayor que {0} TB ({1} GB).\n\nSoluciones posibles:\n- Crear un contenedor/partición menor que {0} TB.\n</entry>
-    <entry lang="es" key="LINUX_MAX_SIZE_HINT">- Utilice una unidad con sectores de 4096 bytes para crear volúmenes ocultos en particiones/dispositivos de hasta 16 TB de tamaño</entry>
-    <entry lang="es" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="es" key="LINUX_NOT_SUPPORTED"> (no es compatible con los componentes disponibles en esta plataforma).\n</entry>
     <entry lang="es" key="LINUX_KERNEL_OLD">Su sistema utiliza una versión antigua del kernel de Linux.\n\nDebido a un error en el kernel de Linux, su sistema puede dejar de responder al escribir datos en un volumen de VeraCrypt. Este problema se puede resolver actualizando el kernel a la versión 2.6.24 o posterior.</entry>
     <entry lang="es" key="LINUX_VOL_UNMOUNTED">El volumen {0} ha sido desmontado.</entry>
     <entry lang="es" key="LINUX_VOL_MOUNTED">El volumen {0} ha sido montado.</entry>

Translations/Language.et.xml

@@ -1517,10 +1517,6 @@
     <entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
     <entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
     <entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
-    <entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
-    <entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
-    <entry lang="en" key="LINUX_DOT_LF">.\n</entry>
-    <entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
     <entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
     <entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
     <entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>