sBitx Menu
Cycles the settings menu (1/2/OFF).
Opens the callsign settings menu for your call and grid.
Opens the web interface in the local browser.
Toggles the transmit equalizer (ON/OFF).
Toggles the receive equalizer (ON/OFF).
Opens the equalizer settings menu which allows users to customize the balance of different audio frequencies.
Toggles the notch filter to suppress interference (ON/OFF). When turned ON it will null out unwanted tones and birdies or interference on the pass band.
Recommended to use when operating CW and Voice modes.
Toggles automatic noise reduction (ON/OFF). When turned ON it reduces the noise floor and buzzing sounds on clear signals.
Recommended to use when operating Voice modes, can help reduce noise fatigue.
Adjusts the notch filter frequency setting [60-3000].
Adjusts the notch width in Hz [60-1000].
Toggles digital signal processing (ON/OFF). When turned ON it attempts to pull out the wanted audio frequencies for voice modes while reducing noise.
Recommended to use when operating Voice modes.
Adjusts the compression level for transmit audio [0-9], 0 is Off and 9 is Max.
If you are using the stock microphone a compression setting of 3 is recommended. For more details about microphones see Microphone Alternatives.
Adjusts the transmit monitor level playback through the speaker [0-10], 0 is Off and 10 is Max.
Adjusts the beat frequency oscillator to move internally generated birdies out of the receive passband [-3000-3000], 0 is Off.
Toggles variable frequency offset lock (ON/OFF).
Adjusts the tune mode duration setting in seconds [2-30] for an external antenna tuner.
Adjusts the tune mode drive level [1-100] for an external antenna tuner.
Adjusts the spectrum display mode (FULL/NORMAL), only available in modes that don't require the console.
Cycles the settings menu (1/2/OFF).
Adjusts the minimum intensity level for the waterfall display [0-200], 100 is default.
Adjusts the maximum intensity level for the waterfall display [0-200], 100 is default.
Adjusts the waterfall speed [20-150], 50 is default.
Adjusts the intensity level for the bandscope display [1-25], 1 is default.
Adjusts the size of the bandscope display [50-150], 50 is default.
Adjusts the averaging level for the bandscope display [1-15], 10 is default.
Adjusts the intensity of the bandscope display [1-10], 10 is default.