Unraid VM Manager

This is a two part app. Code in the arduino folder is supposed to be compiled and run on an Arduino. Code in the server-app is supposed to bu run on the Unraid server in a docker container.

1. Install the Virtual Machine Wake On Lan plugin on your unraid server.
   Note: You might have to enable the plugin in the VM settings page in Unraid. Turn onCheck "Advanced" mode.
2. Edit arduino/config.h and compile and run on a D1 mini.
   uid is the ID the VM has on your Unraid server.
   pin is the pin where you have the switch for the VM.
   activityPin is the pin that you connect to a LED that shows the status of the virtual machine. You'll have to figure out how the pins should be hooked up and configured.
   I'm sorry but I currently don't have time to draw a schematic.
3. Install the accompanying docker container on your Unraid server.
4. BONUS! The design for the housing can be found in the lasercut.pdf file.
   Use a lasercutting service to cut your own little box to house the controller in. I used https://cotter.dk

Notes by /u/RoadrageWorker on reddit

For all like me that are new-ish to Arduino, some advice to get this project rolling:

• When using the D1 mini (and that's what it is made for), you need the board manager files for the Arduino IDE, insert http://arduino.esp8266.com/stable/package_esp8266com_index.json into the "Additional Board Manager URL" field.
• Then load the files via "Tools > Board", look for esp8266 (I am on a different machine right now without the IDE, so the labels might be a bit off).
• Select this board afterwards: "LOLIN(WEMOS)D1 R2 & mini"

Additionally, you will need two libraries that can be found on github and are required by the project.

• https://github.com/koenieee/WakeOnLan-ESP8266
• https://github.com/JoaoLopesF/RemoteDebug
• (unzip and drop into the libraries folder)

When editing the config file, you only need to edit the first 4 lines of each VM, they are as follows:

• MAC (has to be unique)
• UUID
• switch pin
• LED pin

MAC and UUID can be found in the unRAID VM manager, advanced view

This is a sample layout for two VMs including a safety for the destroy function by using two buttons: