WizNet Card Slot Adapter for the Nintendo Gamecube Front Memory card slots based on the ETH2GC project by webhdx + Extrems utilizing either the W5500/W6100 mini modules found on Aliexpress, etc.
Must be used with Swiss-gc
Use Swiss build 1788 or the latest artifact build 1744+ it has the new hypervisor driver for W6100 and W5500 allowing you to use it for Mario Kart LAN etc.
Assembly Video
Aliexpress Links
W6100 Mini Module https://www.aliexpress.us/item/3256805107146668.html
W5500 Mini Module https://www.aliexpress.us/item/3256804674673261.html
Snips used for trimming pieces of pcb/pin headers. https://www.aliexpress.us/item/2251832627908078.html
Screws 2x5MM
https://www.aliexpress.us/item/3256802919903942.html
https://www.aliexpress.us/item/3256806490428816.html
The PCB must be ordered (e.g. from jlcpcb) in 1.6mm thickness with surface finish ENIG at minimum.
You'll want to lay the Card slot adapter pcb center over top of the module making the module and pcb as flush together as possible and solder pin by pin the module to the pcb.
3D Printed Case Enclosure
You'll need to 3D print the case enclosure Top and Bottom pieces from the Case folder to use it in your Memcard Slot preferably on an FDM printer, the case screws are countersunk self tapping M2x5 screws.
