SmartSpray

An IoT integrated precision agriculture system that detects tomato plant diseases from images using a deep learning model and automatically triggers pesticide spraying via an ESP32-controlled hardware system.

---

How It Works

1. A plant leaf image is captured via the Flutter app (camera) or a connected webcam
2. The image is sent to a Flask server running an InceptionV3 CNN model
3. The model classifies the disease from 6 possible categories
4. Based on the detected disease, a spray schedule determines the appropriate chemical, servo index, and spray duration
5. The Flask server sends an HTTP request to an ESP32 microcontroller over WiFi
6. The ESP32 opens the corresponding servo valve and runs the DC pump for the specified duration
7. The spray log and Gemini AI disease explanation are saved and accessible via the Flutter app

---

Supported Diseases

Disease	Chemical	Spray Time
Early Blight	Chlorothalonil	5s
Late Blight	Metalaxyl	4s
Leaf Mold	Mancozeb	5s
Septoria Leaf Spot	Azoxystrobin	2s
Yellow Leaf Curl Virus	No spray (resistant management)	—
Healthy	No spray	—

---

Tech Stack

Machine Learning

• Python, TensorFlow, InceptionV3 (transfer learning)
• OpenCV for image preprocessing
• Trained on PlantVillage dataset (tomato classes)
• 92%+ accuracy on test set

Backend

• Flask (Python)
• Gemini 2.0 Flash Lite API for disease explanations
• JSON-based logging with atomic file writes

Hardware

• ESP32 microcontroller running a WiFi HTTP server
• 3x servo valves (one per chemical container)
• 1x DC pump
• Arduino framework with ESP32Servo and WebServer libraries

Mobile App

• Flutter (Dart)
• Camera capture and image upload
• Manual spray control
• Spray history logs
• Gemini AI disease information screen

---

Setup & Running

1. Python Environment

pip install flask tensorflow opencv-python numpy requests

2. Start the Flask Server

# Live mode (ESP32 enabled)
python -m server.app

# Test mode (ESP32 calls mocked)
python -m server.app -t

Server runs on http://0.0.0.0:5001 by default.

3. Configure the ESP32

Open esp32/PumpCode/PumpCode.ino and fill in your WiFi credentials:

const char* ssid = "YOUR_SSID";
const char* password = "YOUR_PASSWORD";

Flash to your ESP32 via Arduino IDE. After connecting, note the IP address printed to Serial Monitor.

Then update ESP32_URL in server/app.py:

ESP32_URL = "http://<your-esp32-ip>"

4. Configure the Flutter App

In app/lib/services/api_service.dart, update the base URL to point to your Flask server:

static String baseUrl = "http://<your-server-ip>:5001";

Then run the app:

cd app
flutter pub get
flutter run

---

ESP32 Hardware API

The ESP32 exposes a simple HTTP GET endpoint:

GET /servo?duration=<seconds>&servoindex=<0|1|2>

Example:

http://192.168.1.100/servo?duration=4&servoindex=1

This opens servo at index 1, runs the DC pump for 4 seconds, then closes the valve and stops the pump.

---

Circuit

Three servo valves (GPIO 16, 17, 18) each pinch a tube connected to a separate pesticide container. A single DC pump (GPIO 2) pressurizes the system. When a spray command arrives, the pump starts first, then the target servo opens, holds for the specified duration, closes, and the pump stops.

---

Achievements

This project was built as part of the SmartSpray IoT + ML integration initiative at Manipal University Jaipur.

• 92% model accuracy on tomato disease classification
• End-to-end pipeline from image capture → ML inference → ESP32 actuation
• Gemini AI integration for farmer-friendly disease explanations
• Full Flutter mobile app with manual override and spray history